morocco coc certificate help

You are here:

Home
key_page
morocco coc certificate help

To protect Moroccan consumers from substandard products and to ensure that safety and quality certified products enter the Moroccan market, the Moroccan Ministry of Industry, Trade, Green and Digital Economy (MICEVN) has implemented the Verification of Conformity (VoC) program.

Certain imported consumer and industrial products should be tested according to local NM standards, which are partially harmonized with ISO or EN standards. Pre-shipment inspection needs to be carried out in the country of origin/export or within Morocco (destination inspection) – depending on the regulated product category. In both cases, the conformity assessment ends with a Certificate of Conformity (CoC) – proof that the product complies with applicable standards and regulations. Depending on the nature and frequency of imports, three different certification pathways can be selected. Products that want to export to Morocco must obtain a morocco coc certificate.

morocco coc certificate help SERVICES

nigeria soncap: SONCAP stands for the Standards Organisation of Nigeria Conformity Assessment Program. With a rapidly expanding market for imports in Nigeria and to help fulfill its responsibility to protect Nigerian consumers, the Standards Organisation of Nigeria (SON) ...

uganda coc: Inspection of imports coming into Uganda is one of the UNBS mandates that emerged from the UNBS Act Cap 327 which became operational in 1989. Import Inspection duties entail enforcing the requirements of the Uganda standards in order to protect the health and safety of the public and the environment against dangerous and sub-standard products.

Côte D'Ivoire COC: JCT reminds its customers that the Government of Côte d’Ivoire has implemented a Verification of Conformity Program for all goods imported in Côte d’Ivoire with a FOB value superior or equal to XOF 1 million (approx. EUR 1,500).

rohs: RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment. This restriction is anchored in EU Directive 2011/65 / EU. If a product is RoHS-certified, this confirms that the proportion of hazardous, or difficult to dispose substances is limited to the maximum allowed.

rcm: Local responsible supplier required for any ACMA RCM applicable product. Suppliers of products under the ERAC scope must have an ABN in order to register as suppliers. Products not under the ERAC scope can be supplied through a local RCM supplier agent acting on their behalf.

cb: The IECEE CB scheme, or CB scheme for short, is an international system for the mutual recognition of test results and certificates relating to the safety of electrical and electronic components, operating equipment and products.

kenya pvoc: The Kenyan Bureau of Standards (KEBS) has introduced the Pre-Export Verification of Conformity (PVoC) to Standards Program to ensure the quality of products, which must also meet health, safety and environmental standards for Kenyans.

reach: REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry.

ul: UL stands for Underwriter Laboratories, a third-party certification company that’s been around for over a century. UL was founded in 1894 in Chicago. They certify products with the aim to make the world a safer place for both workers and consumers.

tanzania pvoc: Tanzania requires all regulated products imported into the country to be assessed and to conform to the requirements of the TBS PVoC program. Under the PVoC program, a Certificate of Conformity (CoC) is compulsory for customs clearance.

eac: The EAC Certificate of conformity confirms that devices comply with the Technical Regulations of the Eurasian Economic Community (EURASEC).Products that bear the EAC Mark have all passed the conformity assessment procedures in one of the

saa: Australian standards bodies of Standards Association of Australian, so many of my friends called the Australian certification SAA certification. SAA is actually just standard-setting bodies, without issuing product certification. SAA and later renamed: Standards Australia Limited.

WHY CHOOSE US

5 MAIN REASONS TO CHOOSE US

JCT was Initiated in 2003,and has been established since 1990.we have been working on certification and testing for over 15+ years experience.
More than 500 customers choose JCT’s Service, we JCT get more than 1000+ certificate for customers,and save many times and money.Also helped customers get more orders.
We are confident that the job will be completed to your satisfaction. If for any reason you are not fully satisfied with the results, we will fix the issue and won’t consider the job done until you have a smile on your face!
Don’t worry about hidden charges at the end. We present you with fixed rate pricing before any work even begins, so you will know exactly what to expect. What we quote is what you can expect to pay nothing more.