Why do we attach so much importance to CE certification and FCC certification?

ce and fcc certificate

In Europe, this has been all rolled up into one set of standards, called the CE (European Conformity, in French its backwards) mark. So the CE mark is the equivalent of the UL safety testing, and FCC testing (per a EMC Directive which is part of the CE standards).

There are generally two types of testing that must be done on new electronic products, safety and emissions testing. Also, if you have a medical product, other criteria must be followed. The FCC (Federal Communications Commission) requires certain emissions tests for electronic devices. Due to the recent ruling, testing does not actually have to be performed; it is up to the manufacturer to certify that the device complies with the requirements.

As with the FCC marking in the United States, companies can self-certify compliance with applicable CE standards; however, to do so they must provide lengthy technical documentation to support certification, and in many cases it is best to have a third-party laboratory Test their equipment and write reports.

CE Marking certification process :

Review of product, its application and its construction.
Evaluation of applicable directives and harmonic standards.
Mapping of product against applicable CE marking directives and harmonic standards
Getting product tested for directive / standard requirements.
Taking necessary action in construction of product to comply with directive / standard requirements.
TCF compilation.

CE Marking Procedure

The manufacturer identifies the product in Maharashtra, Mumbai, Pune or group of products in Maharashtra, Mumbai, Pune for which he wants to apply for CE marking. The manufacturer in Maharashtra, Mumbai, Pune then contacts a certification body. The certification body appoints an inspection body in Maharashtra, Mumbai, Pune and one or more notified laboratories in Maharashtra, Mumbai, Pune . This can either be separate bodies or it can be from the same organization as the certification body. If the manufacturer in Maharashtra, Mumbai, Pune has a specific wish concerning which inspection body and/or testing laboratories he wants to involve, he will have to make an agreement with the certification body to appoint the other bodies in Maharashtra, Mumbai, Pune.

CE Certificate of conformity

The assessment report from the initial inspection in Maharashtra, Mumbai, Pune, test reports (and a classification report for reaction to fire) from the notified laboratories and test reports from the manufacturer in Maharashtra, Mumbai, Pune (covering all declared characteristics from Table ZA.1 of the product standard) shall be sent to the certification body. The certification body in Maharashtra, Mumbai, Pune shall confirm that tests were conducted according to the criteria given in the product standard, including evaluation of test results, that the samples tested come from the product in Maharashtra, Mumbai, Pune for which a certificate of conformity in Maharashtra, Mumbai, Pune is applied for and that the FPC fulfils the criteria given in the product standard.

Eurotech providing CE Marking – Europeon product certification consultancy services in Aurangabad, Bandra(Mumbai Suburban district),Nagpur, Pune, Akola, Chandrapur, Jalgaon,Parbhani, Sholapur, Thane, Latur, Mumbai-City, Buldhana, Dhule, Kolhpur, Nanded, Raigad, Amravati, Nashik, Wardha, Ahmednagar, Beed, Bhandara, Gadchiroli, Jalna, Osmanabad, Ratnagiri, Sangli, Satara, Sindudurg, Yavatmal, Nandurbar, Washim, Gondia, Hingoli sanand and in other cities of Maharashtra, Mumbai, Pune and in India.

ce and fcc certificate SERVICES

kuwait kucas: The scheme is a set of procedures carried out by PAI to verify the conformity of all ‘Regulated Products’ to Kuwait’s Technical Regulations applicable to imported and domestic products alike in accordance with the regulations of this scheme.

SAUDI WATER LABEL: The Saudi Standards, Metrology and Quality Organization (SASO) set on January 1st, 2018 the new water efficiency technical regulations and its Water Efficiency Label for a number of sanitary products and water flow control equipment based on the rates of water efficiency consumption.

fcc: FCC stands for Federal Communications Commission. The FCC certification or FCC mark is a certification mark employed on all electronic products manufactured and sold in the United States.The FCC enforces this requirement, per Title 47 of the Code of Federal Regulation (CFR).

Zimbabwa COC Certificate

morocco coc: Moroccan Ministry of Industry, Trade, Green and Digital Economy (MCINET) recently established a ‘Verification of Conformity (VoC)’ program to certify that products imported into Morocco comply with the national regulations for product quality and safety.

saa: Australian standards bodies of Standards Association of Australian, so many of my friends called the Australian certification SAA certification. SAA is actually just standard-setting bodies, without issuing product certification. SAA and later renamed: Standards Australia Limited.

GCC: GCC is the acronym for Gulf Cooperation Council in the Gulf. The Gulf Cooperation Council was established in Abu Dhabi, UAE on May 25, 1981. Its member states are Saudi Arabia, Kuwait, United Arab Emirates, Qatar, Sultanate of Oman, Kingdom of Bahrain, and 7 Yemen.

reach: REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry.

cb: The IECEE CB scheme, or CB scheme for short, is an international system for the mutual recognition of test results and certificates relating to the safety of electrical and electronic components, operating equipment and products.

IECEE: The SASO IECEE Recognition Certificate is a Saudi Arabian conformity initiative set up by the Saudi Standards, Metrology and Quality Organization.

ul: UL stands for Underwriter Laboratories, a third-party certification company that’s been around for over a century. UL was founded in 1894 in Chicago. They certify products with the aim to make the world a safer place for both workers and consumers.

ce: The Conformitè Europëenne (CE) Mark is defined as the European Union’s (EU) mandatory conformity marking for regulating the goods sold within the European Economic Area (EEA) since 1985. The CE marking represents a manufacturer’s declaration that products comply with the EU’s New Approach Directives.

WHY CHOOSE US

5 MAIN REASONS TO CHOOSE US

JCT was Initiated in 2003,and has been established since 1990.we have been working on certification and testing for over 15+ years experience.
More than 500 customers choose JCT’s Service, we JCT get more than 1000+ certificate for customers,and save many times and money.Also helped customers get more orders.
We are confident that the job will be completed to your satisfaction. If for any reason you are not fully satisfied with the results, we will fix the issue and won’t consider the job done until you have a smile on your face!
Don’t worry about hidden charges at the end. We present you with fixed rate pricing before any work even begins, so you will know exactly what to expect. What we quote is what you can expect to pay nothing more.